Less is more Less is pro
Less time needed
The new design of the white print head allows the use of more
nozzles compared to previous models.
This allows up to 10% faster printing with special
“High Speed print mode” print settings.
Less maintenance
We reduced the automatic cleaning processes for
increased productivity drastically!
Less environmental pollution
OekoTex Passport and GOTS 5.0
certified Innobella Textile Inks.
Less operator problems
Installation and training by an DTG technician authorized by Brother.
The new sensor technology detects, if the platen is too low in order to
reduce ink mist and ensure print quality.
Print Reservation Function for higher productivity.
Additional Software:
Myze supports Brother direct to garment printers with DTG, DTF and Embroidery. Producing more efficiently, creating your own products quickly, and maintaining a clear overview of all key figures can be achieved with streamlined processes and innovative tools designed for optimal productivity.
Click here for further information.
Information
Overview
Specifications
Basic Specs
Printing Method
Digital direct to garment printing
Machine Size
1400mm x 1300mm x 550mm
Machine Weight
Approx. 120kg
Platen Sizes
Maximum Print Size is 40,6cm x 53,3cm / 16” x 21”
Included Platen Size
14” x 16” (35,6cm x 40,6cm)
Ink Type
Water-based innobella inks
Ink-Head Type
Brother On demand piezo head
Number of Ink-Heads
2 print heads / 8 ink channels
Print Resolution
1200 dpi x 1200 dpi
Print Mode
Single or double for CMYK. Underbase and highlight for white.
Data output
Printer driver (USB, File output)
Power supply
AC 100V-240V, 50/60Hz ± 1Hz
Power consumption
0.8A(average) (Reference: 0.3A - during circulation)
Ink cure
Heat press machine can be used at 356°F (180°C) and 35 seconds duration. For higher volume production, a conveyor oven is recommended to be used at 320°F (160°C) for three and a half minutes. Time and temperature may vary depending on which manufacturer's dryer is used.
Pre-treatment
Before printing, apply pre-treatment using either a manual or automatic device and then dry garment using a heat-press, being sure to follow all manufacturer's instructions. Pre-treatment is necessary for white ink only.
Software
Supported OS
Windows® 7(32 bit/64 bit), Windows 8.1(32 bit/64 bit), Windows 10(32 bit/64 bit), Mac OS® X v10.11.x
Interface
USB2.0, LAN(10 BASE-T, 100 BASE-TX), USB Flash Memory(Under 32GB, FAT32 format)
Driver operating conditions
2GHz CPU (minimum recommendation) 4GB RAM
Display resolution
XGA(1024x768) (minimum recommendation)
Recommended applications
Adobe® Photoshop CS6/CC, Adobe® Illustrator CS6/CC, CorelDRAW® 2018/2019 (Windows)