The new design of the white print head allows the use of more
nozzles compared to previous models.
This allows up to 10% faster printing with special
“High Speed print mode” print settings.
We reduced the automatic cleaning processes for
increased productivity drastically!
OekoTex Passport and GOTS 5.0
certified Innobella Textile Inks.
Installation and training by an DTG technician authorized by Brother.
The new sensor technology detects, if the platen is too low in order to
reduce ink mist and ensure print quality.
Print Reservation Function for higher productivity.
Direct inkjet garment printer
1400mm x 1300mm x 550mm
Maximum Print Size is 40,6cm x 53,3cm / 16” x 21”
14” x 16” (35,6cm x 40,6cm)
Water-based inobella textile ink | C, M, Y, K, W
Brother On demand piezo head
2 print heads / 8 ink channels
1200 dpi x 1200 dpi
Single or double for CMYK. Underbase and highlight for white.
Printer driver (USB, File output)
AC 100V-240V, 50/60Hz ± 1Hz
0.8A(average) (Reference: 0.3A - during circulation)
Heat press machine can be used at 356°F (180°C) and 35 seconds duration. For higher volume production, a conveyor oven is recommended to be used at 320°F (160°C) for three and a half minutes. Time and temperature may vary depending on which manufacturer's dryer is used.
Before printing, apply pre-treatment using either a manual or automatic device and then dry garment using a heat-press, being sure to follow all manufacturer's instructions. Pre-treatment is necessary for white ink only.
Windows® 7(32 bit/64 bit), Windows 8.1(32 bit/64 bit), Windows 10(32 bit/64 bit), Mac OS® X v10.11.x
USB2.0, LAN(10 BASE-T, 100 BASE-TX), USB Flash Memory(Under 32GB, FAT32 format)
2GHz CPU (minimum recommendation) 4GB RAM
XGA(1024x768) (minimum recommendation)
Adobe® Photoshop CS6/CC, Adobe® Illustrator CS6/CC, CorelDRAW® 2018/2019 (Windows)
Fields marked with * are mandatory
Please provide your email address or phone number.
Only up to 3 products of the same product category can be added for comparison.