Direct inkjet garment printer
1780mm x 1300mm x 1210mm (with recommended stand)
Approx. 165kg
Maximum Print Size is 40,6cm x 53,3cm / 16” x 21”
14” x 16” (35,6cm x 40,6cm)
Water-based inobella textile ink | C, M, Y, K, W
Brother On demand piezo head
2 print heads / 8 ink channels
1200 dpi x 1200 dpi
Single or double for CMYK. Underbase and highlight for white.
Printer driver (USB, File output)
AC 100V-240V, 50/60Hz ± 1Hz
0.8A(average) (Reference: 0.3A - during circulation)
Heat press machine can be used at 356°F (180°C) and 35 seconds duration. For higher volume production, a conveyor oven is recommended to be used at 320° (160°) for three and a half minutes. Time and temperature may vary depending on which manufacturer's dryer is used.
Before printing, apply pre-treatment using either a manual or automatic device and then dry garment using a heat-press, being sure to follow all manufacturer's instructions. Pre-treatment is necessary for white ink only.
Windows® 7(32 bit/64 bit), Windows 8.1(32 bit/64 bit), Windows 10(32 bit/64 bit), Mac OS® X v10.11.x
USB2.0, LAN(10 BASE-T, 100 BASE-TX), USB Flash Memory(Under 32GB, FAT32 format)
2GHz CPU (minimum recommendation) 4GB RAM
XGA(1024x768) (minimum recommendation)
Adobe® Photoshop CS6/CC, Adobe® Illustrator CS6/CC, CorelDRAW® 2018/2019 (Windows)
helps Bother International(SG)prevent automated submissions.
Fields marked with * are mandatory
Please provide your email address or phone number.
Only up to 3 products of the same product category can be added for comparison.